MODULES AVAILABLE IN CONSTANTA TRAINING CENTER

*The training session will be provided only in case there are 4 requests for participation registered

GWO BLADE REPAIR TRAINING (NEW 01.10.2021) PHOTOVOLTAIC PANELS INSTALLER (NEW 01.05.2021) GWO ADVANCED RESCUE TRAININGS GWO SLINGER SIGNALLER TRAININGS GWO BASIC SAFETY TRAININGS GWO BASIC TECHNICAL TRAININGS ROPE ACCESS TECHNICIAN WIND ENERGY TRAININGS ISCIR TRAININGS ADVANCED INDUSTRY TRAININGS ENERCON TRAININGS PACK


GWO BLADE REPAIR TRAINING
Module Code Module Name / Category Duration Description
RESS-ROT-01
Blade Repair Training
NEW 01.10.2021
GWO BLADE REPAIR
70 [h] The aim of the GWO Blade Repair training module is to enable the participants to support and care for themselves and others working in the wind industry by possessing the necessary knowledge, skills and ability for blade repair. Upon successful completion of the GWO blade repair training course, the participants will be able to perform and document a wind turbine blade inspection, and execute repair work in accordance with a work instruction while maintaining the aerodynamic profile and structural integrity in glass fiber reinforced composite parts of a wind turbine
12 participants
At Training Center


PHOTOVOLTAIC PANELS INSTALLER
Module Code Module Name / Category Duration Description
RESS-PV-S
Photovoltaic panels installer, specialization course
NEW 01.05.2021
Cursuri acreditate in Romania
144 [h] The occupation of Solar Photovoltaic Installers (COR code 741103) is a specialization of the personnel working as construction electricians and which requires a prior electrician qualification in order to be practiced. Based on the competences developed within the initial training system in the field of electrical engineering and considering the similarities to other occupations from the same core group with reference to the activities performed at work by respective specialists.
14 participants
At Training Center


ROPE ACCESS TECHNICIAN
Module Code Module Name / Category Duration Description
Rope Access - Code COR
Rope Access Technician
Rope Access Technician
45 [h] This course will allow the participants to acquire theoretical knowledge and practical skills necessary to safely perform work at height under circumstances of increased difficulty and hazard.
14 participants
At Training Center


GWO ADVANCED RESCUE TRAININGS
Module Code Module Name / Category Duration Description
RESS-ART-08
Advanced Rescue Training, basics
GWO ADVANCED RESCUE TRAININGS
29 [h] The GWO ART (Advanced Rescue Training) elevates the rescuer's self-reliance and enables successful transport of a colleague who cannot self-evacuate, to an assembly point until professional emergency responders arrive. The modules teach entry-type casualty rescue operations in a turbine using industry standard rescue equipment, rescue methods and techniques, exceeding those of GWO Working at heights.
6 participants
At Training Center
RESS-ARTR-08
Advanced Rescue Training, refresher
GWO ADVANCED RESCUE TRAININGS
14 [h] The GWO ART (Advanced Rescue Training) elevates the rescuer's self-reliance and enables successful transport of a colleague who cannot self-evacuate, to an assembly point until professional emergency responders arrive. The modules teach entry-type casualty rescue operations in a turbine using industry standard rescue equipment, rescue methods and techniques, exceeding those of GWO Working at heights.
6 participants
At Training Center


GWO SLINGER SIGNALLER TRAININGS
Module Code Module Name / Category Duration Description
RESS-SLS-01
Slinger Signaller
GWO SLINGER SIGNALLER TRAININGS
16 [h] The GWO Slinger Signaller module will allow the delegates to be aware of the risks and hazards encountered when working with Slinger Signalling within the wind industry. Furthermore, they will be able to control and mitigate those risks and hazards.
8 participants
At Training Center


GWO BASIC SAFETY TRAININGS
How RESS will deliver the trainings during the period affected by COVID-19
Start Date Course Name Duration Max participants Available seats BOOK course
04-10-2022
RESS-MH-22
Manual handling, Training Center
4h 12
1
BOOK course
04-10-2022
RESS-FAW-16
Fire awareness and fire fighting, Training Center
4h 12
0
04-10-2022
RESS-FAR-03
Refresher Emergency first aid for working at heights, Training Center
4h 12
11
BOOK course
05-10-2022
RESS-WAH-05
Working at heights and rescue training, Training Center
16h 8
0
05-10-2022
RESS-MHR-22
Refresher Manual handling, Training Center
4h 12
7
BOOK course
05-10-2022
RESS-FAWR-16
Refresher Fire awareness and fire fighting, Training Center
4h 12
4
BOOK course
05-10-2022
RESS-WAH-05-TSL
Working at heights and rescue training, basics, using TSL equipment / Lucrul si salvarea de la inaltime folosind echipamentul TSL, , Training Center
24h 8
5
BOOK course
10-10-2022
RESS-FA-02
Emergency First aid for working at heights, Training Center
8h 12
5
BOOK course
11-10-2022
RESS-FAW-16
Fire awareness and fire fighting, Training Center
4h 12
7
BOOK course
11-10-2022
RESS-MH-22
Manual handling, Training Center
4h 12
6
BOOK course
12-10-2022
RESS-WAH-05
Working at heights and rescue training, Training Center
16h 8
8
BOOK course
12-10-2022
RESS-WAH-05
Working at heights and rescue training, Training Center
16h 8
0
Module Code Module Name / Category Duration Description
RESS-SS-01
Sea Survival, basics
GWO BASIC SAFETY TRAININGS
8 [h] The aims of this BST Sea Survival course are, by theoretical and practical training to give the participants the basic knowledge and skills to act safely and take the correct preventive actions in all aspects of offshore operations from shore to installation vessel or WTG and vice versa, both during normal operation and in an emergency in an offshore wind energy environment.
8 participants
At Training Center
RESS-SSR-01
Sea Survival, refresher
GWO BASIC SAFETY TRAININGS
8 [h] The aims of this BST Sea Survival course are, by theoretical and practical training to give the participants the basic knowledge and skills to act safely and take the correct preventive actions in all aspects of offshore operations from shore to installation vessel or WTG and vice versa, both during normal operation and in an emergency in an offshore wind energy environment.
8 participants
At Training Center
RESS-FA-02
First Aid for working at height, basics
GWO BASIC SAFETY TRAININGS
8 [h] This course applies common procedures for granting first aid in the field of wind turbines. Reactions are underlined mostly, efficient in case of accidents at work, granting first aid and the execution of rescue measures onsite according to the restrictions from the wind turbines field. Legal requirements and standard procedures are described in this module, which is a prerequisite for all works related to wind turbines.
12 participants
At Training Center
RESS-FAR-03
First Aid for working at height, refresher
GWO BASIC SAFETY TRAININGS
4 [h] his course applies common procedures for granting first aid in the field of wind turbines. Reactions are underlined mostly, efficient in case of accidents at work, granting first aid and the execution of rescue measures onsite according to the restrictions from the wind turbines field. Legal requirements and standard procedures are described in this module, which is a prerequisite for all works related to wind turbines.
12 participants
At Training Center
RESS-FA-02-T
Emergency First aid for working at heights, online theory
GWO BASIC SAFETY TRAININGS
515 [min] This course applies common procedures for granting first aid in the field of wind turbines. Reactions are underlined mostly, efficient in case of accidents at work, granting first aid and the execution of rescue measures onsite according to the restrictions from the wind turbines field. Legal requirements and standard procedures are described in this module, which is a prerequisite for all works related to wind turbines.
8 participants
ONLINE Trainings
RESS-FAR-P-03
Refresher Emergency first aid for working at heights, partial online
GWO BASIC SAFETY TRAININGS
255 [min] This course applies common procedures for granting first aid in the field of wind turbines. Reactions are underlined mostly, efficient in case of accidents at work, granting first aid and the execution of rescue measures onsite according to the restrictions from the wind turbines field. Legal requirements and standard procedures are described in this module, which is a prerequisite for all works related to wind turbines.
8 participants
ONLINE Trainings
RESS-WAH-05
Working at heights and rescue training, basics
GWO BASIC SAFETY TRAININGS
16 [h] The training session allows the participant to carry out rescue operations in wind turbines in a safe way. The module includes PPE handling, maintenance and inspection. This module is a prerequisite for any work on wind turbines.
8 participants
At Training Center
RESS-WAHR-06
Working at heights and rescue training, refresher
GWO BASIC SAFETY TRAININGS
8 [h] The training session allows the participant to carry out rescue operations in wind turbines in a safe way. The module includes PPE handling, maintenance and inspection. This module is a prerequisite for any work on wind turbines.
8 participants
At Training Center
RESS-WAH-05-T
Working at heights and rescue training, online theory
GWO BASIC SAFETY TRAININGS
265 [min] The training session allows the participant to carry out rescue operations in wind turbines in a safe way. The module includes PPE handling, maintenance and inspection. This module is a prerequisite for any work on wind turbines.
8 participants
ONLINE Trainings
RESS-WAHR-P-06
Refresher Working at heights and rescue training, partial online
GWO BASIC SAFETY TRAININGS
215 [min] The training session allows the participant to carry out rescue operations in wind turbines in a safe way. The module includes PPE handling, maintenance and inspection. This module is a prerequisite for any work on wind turbines. 8 participants
8 participants
ONLINE Trainings
RESS-WAH-05-TSL
Working at heights and rescue training, basic training, using TSL equipment
GWO BASIC SAFETY TRAININGS
24 [h] The training session allows the participant to carry out rescue operations in wind turbines in a safe way. The module includes PPE handling, maintenance and inspection also using the TSL equipment. 8 participants
8 participants
At Training Center
RESS-WAHR-06-TSL
Working at heights and rescue training, refresher training, using TSL equipment
GWO BASIC SAFETY TRAININGS
16 [h] The training session allows the participant to carry out rescue operations in wind turbines in a safe way. The module includes PPE handling, maintenance and inspection also using the TSL equipment.8 participants
8 participants
At Training Center
RESS-WAH-05-TSL-T
Working at heights and rescue training, basic training, using TSL equipment, online theory
GWO BASIC SAFETY TRAININGS
480 [min] The training session allows the participant to carry out rescue operations in wind turbines in a safe way. The module includes PPE handling, maintenance and inspection also using the TSL equipment.
8 participants
ONLINE Trainings
RESS-WAHR-P-06-TSL
Working at heights and rescue training, refresher training, using TSL equipment, partial online
GWO BASIC SAFETY TRAININGS
480 [min] The training session allows the participant to carry out rescue operations in wind turbines in a safe way. The module includes PPE handling, maintenance and inspection also using the TSL equipment.
8 participants
ONLINE Trainings
RESS-FAW-16
Fire awareness and fire-fighting, basics
GWO BASIC SAFETY TRAININGS
4 [h] This module gives an overview of the causes of fire and preventative fire protection measures. Participants are taught to extinguish naked flames with various kinds of extinguishers.
12 participants
At Training Center
RESS-FAWR-16
Fire awareness and fire-fighting, refresher
GWO BASIC SAFETY TRAININGS
4 [h] This module gives an overview of the causes of fire and preventative fire protection measures. Participants are taught to extinguish naked flames with various kinds of extinguishers.
12 participants
At Training Center
RESS-FAW-16-T
Fire awareness and fire fighting, online theory
GWO BASIC SAFETY TRAININGS
120 [min] This module gives an overview of the causes of fire and preventative fire protection measures. Participants are taught to extinguish naked flames with various kinds of extinguishers.
8 participants
ONLINE Trainings
RESS-FAWR-P-16
Refresher Fire awareness and fire fighting, partial online
GWO BASIC SAFETY TRAININGS
130 [min] This module gives an overview of the causes of fire and preventative fire protection measures. Participants are taught to extinguish naked flames with various kinds of extinguishers.
8 participants
ONLINE Trainings
RESS-MH-22
Manual handling, basics
GWO BASIC SAFETY TRAININGS
24 [h] This module addresses to all the people engaged in activities like: administration, production, management, service and maintenance related to wind turbines. Lifting and transport result in considerable pressures on the human body. Participants are trained to recognize and evaluate possible pressure on the musculoskeletal system appearing during work. Participants are introduced to the ergonomic work procedures through practical exercises.
12 participants
At Training Center
RESS-MHR-22
Manual handling, refresher
GWO BASIC SAFETY TRAININGS
4 [h] This module addresses to all the people engaged in activities like: administration, production, management, service and maintenance related to wind turbines. Lifting and transport result in considerable pressures on the human body. Participants are trained to recognize and evaluate possible pressure on the musculoskeletal system appearing during work. Participants are introduced to the ergonomic work procedures through practical exercises. 12 participants
12 participants
At Training Center
RESS-MH-22-T
Manual handling, online theory
GWO BASIC SAFETY TRAININGS
135 [min] This module addresses to all the people engaged in activities like: administration, production, management, service and maintenance related to wind turbines. Lifting and transport result in considerable pressures on the human body. Participants are trained to recognize and evaluate possible pressure on the musculoskeletal system appearing during work. Participants are introduced to the ergonomic work procedures through practical exercises.
8 participants
ONLINE Trainings
RESS-MHR-P-22
Manual handling, partial online
GWO BASIC SAFETY TRAININGS
155 [min] This module addresses to all the people engaged in activities like: administration, production, management, service and maintenance related to wind turbines. Lifting and transport result in considerable pressures on the human body. Participants are trained to recognize and evaluate possible pressure on the musculoskeletal system appearing during work. Participants are introduced to the ergonomic work procedures through practical exercises.
8 participants
ONLINE Trainings
RESS-SS-01-T
Sea Survival, basics online theory
GWO BASIC SAFETY TRAININGS
240 [min] The aims of this BST Sea Survival course are, by theoretical and practical training to give the participants the basic knowledge and skills to act safely and take the correct preventive actions in all aspects of offshore operations from shore to installation vessel or WTG and vice versa, both during normal operation and in an emergency in an offshore wind energy environment.
8 participants
ONLINE Trainings
RESS-SSR-P-01
Sea Survival, refresher partial online
GWO BASIC SAFETY TRAININGS
260 [min] The aims of this BST Sea Survival course are, by theoretical and practical training to give the participants the basic knowledge and skills to act safely and take the correct preventive actions in all aspects of offshore operations from shore to installation vessel or WTG and vice versa, both during normal operation and in an emergency in an offshore wind energy environment.
8 participants
ONLINE Trainings


GWO BASIC TECHNICAL TRAININGS
Start Date Course Name Duration Max participants Available seats BOOK course
05-10-2022
RESS-BTTI-01
Basic Technical Training Installation Module / Modul Instalare BTT
18 h 12
6
BOOK course
The Global Wind Organisation (GWO) is an association of Wind Turbine owners and manufacturers with the aim of supporting an injury-free work environment in the wind industry. An objective of GWO is to develop common industry training and best practice Standards for health and safety as a vital and necessary way forward to reduce risks for personnel in the wind industry working on site and to reducing environmental risks across Europe and the globe. This Standard has been developed in response to the demand for recognizable Basic Technical Training in the industry, and has been prepared in co-operation between the members of GWO based on risk assessments and factual incident and accident statistics pertaining to the installation, service and maintenance of wind turbine generators and wind power plants.

The members of the Global Wind Organisation (GWO) recognize trained persons as being able to safely perform basic hydraulics, mechanical and electrical tasks under the supervision of an experienced technician. GWO members agree that everyone working on one of their properties (Wind Turbine Generators, sub stations, etc.) shall complete Basic Technical Training courses relevant for their assignments. All work shall be done in teams of at least 2 competent persons. Exemptions from the above can be made based on internal company rules.
Module Code Module Name / Category Duration Description
RESS-BTTI-01
Basic Technical Training Installation
GWO BASIC TECHNICAL TRAININGS
18 [h] The aim of this BTT Installation Module is to give the Delegates the knowledge and skills to carry out basic installation tasks (supervised by an experienced technician), using safe working procedures and the correct PPE
12 participants
At Training Center
RESS-BTTI-01-T
BTT Installation, online theory
GWO BASIC TECHNICAL TRAININGS
720 [min] The aim of this BTT Installation Module is to give the Delegates the knowledge and skills to carry out basic installation tasks (supervised by an experienced technician), using safe working procedures and the correct PPE 8 participants
8 participants
ONLINE Trainings
RESS-BTTM-01
Basic Technical Training Mechanical
GWO BASIC TECHNICAL TRAININGS
14 [h] The aim of the BTT Mechanic Module is to give the Delegates the knowledge and skills to carry out basic mechanical tasks (supervised by an experienced technician), using safe working procedures and the correct PPE.
12 participants
At Training Center
RESS-BTTM-01-T
BTT Mechanical, online theory
GWO BASIC TECHNICAL TRAININGS
480 [min] The aim of the BTT Mechanic Module is to give the Delegates the knowledge and skills to carry out basic mechanical tasks (supervised by an experienced technician), using safe working procedures and the correct PPE. 8 participants
8 participants
ONLINE Trainings
RESS-BTTE-01
Basic Technical Training Electrical
GWO BASIC TECHNICAL TRAININGS
10 [h] The training session allows the participant to gain basic electrical skills in order to perform regular jobs in the proximity of electrical installations as well as simple electrical procedures and measurements.
12 participants
At Training Center
RESS-BTTE-01-T
BTT Electrical, online theory
GWO BASIC TECHNICAL TRAININGS
470 [min] The training session allows the participant to gain basic electrical skills in order to perform regular jobs in the proximity of electrical installations as well as simple electrical procedures and measurements.
8 participants
ONLINE Trainings
RESS-BTTH-01
Basic Technical Training Hydraulic
GWO BASIC TECHNICAL TRAININGS
9 [h] The aim of the BTT Hydraulic Module is to give the Delegates the knowledge and skills to carry out basic hydraulic tasks (supervised by an experienced technician), using safe working procedures and the correct PPE.
12 participants
At Training Center
RESS-BTTH-01-T
BTT Hydraulic, online theory
GWO BASIC TECHNICAL TRAININGS
455 [min] The aim of the BTT Hydraulic Module is to give the Delegates the knowledge and skills to carry out basic hydraulic tasks (supervised by an experienced technician), using safe working procedures and the correct PPE.
8 participants
ONLINE Trainings


WIND ENERGY TRAININGS
Start Date Course Name Duration Max participants Available seats BOOK course
07-10-2022
RESS-HG-01
Handling of hazardous materials
4 hours 8
0
Module Code Module Name / Category Duration Description
RESS-WTB-01
Wind Turbine Basic
WIND ENERGY TRAININGS
8 [h] The training session allows the participant to have an overview of wind turbines, from the point of view of the history, component and principle of operation. This module is a prerequisite for any work on wind turbines.
12 participants
At Training Center
RESS-ELTW-01
Electrical Wrenches
WIND ENERGY TRAININGS
8 [h] Overview of the techniques for using electrical wrenches. Instructions about choosing the appropriate electrical wrenches. Using the electrical wrenches .
12 participants
At Training Center
RESS-HYD-01
Hydraulic Torqueing & Tension Bolted Connections
WIND ENERGY TRAININGS
16 [h] Overview of the techniques for using torque wrenches, hydraulic wrenches and tensioning devices. Instructions about choosing the appropriate torqueing device in the controlled bolting. Using the torque wrenches and tensioning devices.
8 participants
At Training Center
RESS-TET-01
Technical English Basic for Wind Turbines
WIND ENERGY TRAININGS
8 [h] The training session allows the participant to use the specific vocabulary for the WTG field of activity. The module includes a small introduction in wind turbines and a vocabulary part.
12 participants
At Training Center
RESS-HG-01
Handling of hazardous materials
WIND ENERGY TRAININGS
8 [h] This module provides a comprehensive introduction to hazardous materials and their classification. The focus is on those hazardous materials used in both the production and maintenance of wind turbines. Participants learn how to work with safety data sheets, standard operating procedures and instructions.
18 participants
At Training Center
RESS-ELT-01
Basic Electric / Earthing Protection - Specific Training
WIND ENERGY TRAININGS
12 [h] The training session allows the participant to gain basic electrical skills in order to perform regular jobs in the proximity of electrical installations as well as simple electrical procedures and measurements.
8 participants
At Training Center


ISCIR TRAININGS
Module Code Module Name / Category Duration Description
RESS-RSVTI-A
RSVTI Operator - A module
ISCIR TRAININGS
16 [h] his module, allows participants to obtain a authorization which grants the right to be employed and to act as "lifting and under pressure equipment responsible" according to Romanian llegislation in regards to lifting equipment inside wind turbines and not only. The courses are specific for the Romanian legislation and are only available in Romanian language
18 participants
At Training Center
RESS-RSVTI-B
RSVTI Operator - B module - reauthorisation
ISCIR TRAININGS
8 [h] This is a refresher training for Module A. Initial authorization is valid for 4 years.
18 participants
At Training Center


ADVANCED INDUSTRY TRAININGS
Module Code Module Name / Category Duration Description
RESS-MHV-01
Medium and High Voltage Switching up to 52kV
ADVANCED INDUSTRY TRAININGS
8 [h] The training session allows the participant to gain electrical skills in order to perform manoeuvres on medium and high voltage lines. The training applies to certified electricians.
8 participants
At Training Center


ENERCON TRAININGS PACK
Module Code Module Name / Category Duration Description
RESS-ELT-01
Basic electro technical skills -electrically qualified person (Basic Electric / Earthing Protection)
ENERCON TRAININGS PACK
12 [h] The training session allows the participant to gain basic electrical skills in order to perform regular jobs in the proximity of electrical installations as well as simple electrical procedures and measurements.
8 participants
At Training Center
RESS-HG-01
Handling of hazardous materials
ENERCON TRAININGS PACK
8 [h] This module provides a comprehensive introduction to hazardous materials and their classification. The focus is on those hazardous materials used in both the production and maintenance of wind turbines. Participants learn how to work with safety data sheets, standard operating procedures and instructions.
18 participants
At Training Center
RESS-ELTW-01
Electrical Wrenches
ENERCON TRAININGS PACK
8 [h] Overview of the techniques for using electrical wrenches. Instructions about choosing the appropriate electrical wrenches. Using the electrical wrenches .
12 participants
At Training Center
RESS-HYD-01
Hydraulic Torqueing & Tension Bolted Connections
ENERCON TRAININGS PACK
16 [h] Overview of the techniques for using torque wrenches, hydraulic wrenches and tensioning devices. Instructions about choosing the appropriate torqueing device in the controlled bolting. Using the torque wrenches and tensioning devices.
8 participants
At Training Center